Home > Machine Reference > Gantry cutting > ESG200-2T-S Rotating-Tilting Diamond Wire Cutting Machine

ESG200-2T endless diamond wire saw — front view showing both wire spools
ESG200-2T endless diamond wire saw — three-quarter view
ESG200-2T endless diamond wire saw — side view of the cutting chamber
ESG200-2T cutting chamber — guide spools, coolant nozzles and workpiece vice
ESG200-2T touch-screen HMI — cutting height, thickness and feed speed settings
ESG200-2T endless diamond wire saw — front view showing both wire spools
ESG200-2T endless diamond wire saw — three-quarter view
ESG200-2T endless diamond wire saw — side view of the cutting chamber
ESG200-2T cutting chamber — guide spools, coolant nozzles and workpiece vice
ESG200-2T touch-screen HMI — cutting height, thickness and feed speed settings

ESG200-2T-S Rotating-Tilting Diamond Wire Cutting Machine

Description :

ESG200-2T-S is based on the gantry cutting machine with the addition of a rotation function, allowing for cutting at multiple angles.
Send Message

This page is kept as a wire-compatibility reference. The machine is engineered and built at our group plant in Zhengzhou, China. What we supply from Singapore is the consumable: endless diamond wire loops, spool wire and custom specifications — matched to this model’s wire path, tension window and guide-wheel geometry.

See wire specifications and formats →

Features :

ESG200-2T-S is a gantry endless diamond wire cutting machine designed for multi-angle precision work. Its rotating and tilting workbench supports complex cutting orientations while the endless diamond wire reduces reversal impact and maintains a narrow cutting path.

The model is intended for prototypes and workpieces that require angle adjustment within a compact machine footprint. Review the endless wire saw machine range or request a sample-cutting evaluation before specifying fixtures and wire parameters.

1. A workbench with rotatable and downwardtilt can achieve multi angle cutting

2. The workbench can rotate horizontally 360°and tilt downwards 0-15°

3. Auxiliary function for changing wires Easier tochange wires

4. Cleverly Designed Tension StructureIntelligent Adjustment of tension force

Technical Parameters :

Electric 220v
Machine size 833mm×733mm×1720mm(LxWxH)
Total power 3.0Kw
Total weight 350KG
Worktable load capacity 30kg
Drive mode Servo
Maximum speed 3000RPM
Cutting thickness 0.1-200mm(adjustable)
Maximum cutting size 200mm×200mm×200mm(L×W×H)
Maximum cutting size when rotated φ200×120mm
Water tank size 650×640×500mm(150L)
Maximum wire speed 38m/s

Application areas :

In addition to the aforementioned areas, we can also cut many other materials and provide free trial cutting services and one-stop ODM services. If you have any technical questions, we can provide free technical consultation. Please feel free to contact us!

  • Solar panels and wind turbines — renewable energy applications

    Silicon cutting

  • Optical glass cutting with an endless diamond wire

    Optical glass cutting

  • Graphite and corrugated paper cutting with an endless diamond wire

    Graphite/Corrugated paper

  • Ceramic target cutting with an endless diamond wire

    Ceramic/Target cutting

  • Crystal cutting with an endless diamond wire

    Crystal Cutting

  • Metal cutting with an endless diamond wire

    Metal cutting

HOW to choose the right model of the machine?

1.The hardness of your material and the size of the materials before cutting.

2.The cutting method which is best for your material.

3.If any special request for cutting.

 

Cutting video:

Frequently Asked Questions

Q: What does the multi-angle workbench on the ESG200-2T-S allow?
The workbench rotates and tilts, so a workpiece can be presented at compound angles without being unclamped and re-fixtured between cuts. That matters when a single part needs several faces or a non-orthogonal section, because each re-fixture is an opportunity to lose alignment.

Q: What materials is the ESG200-2T-S intended for?
Hard, brittle and high-value materials that benefit from a narrow kerf and low cutting force - graphite, silicon, ceramics, optical glass, magnetic materials and crystals. The tilting table extends the same cutting method to parts where the required cut plane is not horizontal.

Q: Is the wire tension set manually?
Tension control is automatic. The operator does not calculate or adjust tension for each job, which keeps the cutting conditions repeatable between operators and between shifts, and reduces the risk of a slack wire on a delicate workpiece.

Q: Who supplies the ESG200-2T-S and where is it built?
ENSOLLTECH PTE. LTD., a Singapore company (UEN 202551184N, 266A South Bridge Road, #02-01, Singapore 058815), supplies the machine worldwide. It is built at the group's own ISO 9001 certified plant, Zhengzhou Ensoll Tools Technology Co., Ltd., in Zhengzhou, China.

Frequently asked questions

What does the multi-angle workbench on the ESG200-2T-S allow?

The workbench rotates and tilts, so a workpiece can be presented at compound angles without being unclamped and re-fixtured between cuts. That matters when a single part needs several faces or a non-orthogonal section, because each re-fixture is an opportunity to lose alignment.

What materials is the ESG200-2T-S intended for?

Hard, brittle and high-value materials that benefit from a narrow kerf and low cutting force - graphite, silicon, ceramics, optical glass, magnetic materials and crystals. The tilting table extends the same cutting method to parts where the required cut plane is not horizontal.

Is the wire tension set manually?

Tension control is automatic. The operator does not calculate or adjust tension for each job, which keeps the cutting conditions repeatable between operators and between shifts, and reduces the risk of a slack wire on a delicate workpiece.

Who supplies the ESG200-2T-S and where is it built?

ENSOLLTECH PTE. LTD., a Singapore company (UEN 202551184N, 266A South Bridge Road, #02-01, Singapore 058815), supplies the machine worldwide. It is built at the group's own ISO 9001 certified plant, Zhengzhou Ensoll Tools Technology Co., Ltd., in Zhengzhou, China.

Supplied by ENSOLLTECH PTE. LTD.

ENSOLLTECH PTE. LTD. is a Singapore company (UEN 202551184N), registered at 266A South Bridge Road, #02-01, Singapore 058815. We supply endless diamond wire loops and diamond wire saw machines; the products are manufactured at our group’s own ISO 9001-certified plant in Zhengzhou, China — not sourced from third-party traders.

Company profile: About ENSOLLTECH  ·  Technical enquiry: Contact our Singapore office

Send Message

If you have any question, Please contact us

    Send Message

    If you have any question, please contact us

      Home Tel Mail Inquiry

      WhatsApp Us